| ROTOR INPUT VOLTAGE RATING IN VOLTS | 25.7 MINIMUM AND |
| 26.3 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 163.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 720.0 MILLIWATTS MAXIMUM |
| FREQUENCY IN HERTZ | 396.0 MINIMUM AND |
| 404.0 MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 10 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 22.00 MINIMUM AND |
| 33.00 MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 147.90 MINIMUM AND |
| 200.10 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 5.70 MINIMUM AND |
| 9.70 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 25.92 MINIMUM AND |
| 35.08 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 37.60 MINIMUM AND |
| 56.40 MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 13.60 MINIMUM AND |
| 18.40 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 14.11 MINIMUM AND |
| 19.09 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 6.80 MINIMUM AND |
| 7.80 MAXIMUM |
| TRANSFORMATION RATIO | 0.440 ROTOR TO STATOR MINIMUM AND |
| 0.468 ROTOR TO STATOR MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT MINIMUM AND |
| 5.000 INPUT TO OUTPUT MAXIMUM |
| MAXIMUM TEMP RISE | 125.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND B |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8128 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7360 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.1840 INCHES NOMINAL |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4370 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |