| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 80.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 320.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND B |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 11 |
| ZRO RESISTANCE IN OHMS | 115.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 340.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 16.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 71.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 81.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 40.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 72.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 38.00 NOMINAL |
| TRANSFORMATION RATIO | 0.500 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.200 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 65.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.2060 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0650 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0900 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7440 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0700 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND |
| 0.8150 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.3380 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |