| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 176.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 900.0 MILLIWATTS NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 170.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 77.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 42.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 80.50 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 44.00 NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 24.00 NOMINAL |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 11.00 NOMINAL |
| ZSS IMPEDANCE ANGLE IN DEG | 27.50 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 24.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 4.20 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1920 INCHES MINIMUM AND |
| 2.2160 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND |
| 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8280 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3640 INCHES MINIMUM AND |
| 0.3880 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| FRAGILITY FACTOR | MODERATELY RUGGED |