| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 20.0 CENTIMETER-GRAMS MAXIMUM |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 14 |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.1270 INCHES MINIMUM AND 0.1370 INCHES MAXIMUM SHOULDER |
| OVERALL LENGTH | 2.0950 INCHES MINIMUM AND 2.1670 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5600 INCHES MINIMUM AND 1.6220 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 16.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 2200.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1700.00 NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 3.0 OUNCES |
| SHAFT END PLAY | 0.0002 INCHES MINIMUM AND 0.0012 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 75.0 GRAMS |
| SHAFT LENGTH | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 500.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 640.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 5.5 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 20.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 11 WIRE LEAD |
| TRANSFORMATION RATIO | 0.990 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0680 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM |