| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 11 |
| COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| CONNECTOR MANUFACTURER CODE | 97942 |
| CONNECTOR MANUFACTURER PART NUMBER | 577R631H03 |
| FLANGE DIAMETER | 1.0650 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OVERALL LENGTH | 3.0050 INCHES MINIMUM AND 3.0350 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.2620 INCHES MINIMUM AND 2.2680 INCHES MAXIMUM |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1500.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1400.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 225.00 NOMINAL |
| SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.8670 INCHES MINIMUM AND 0.9030 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT FLATTED PORTION THICKNESS | 0.1040 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM FRONT SHAFT |
| SHAFT FLATTED PORTION LENGTH | 0.6470 INCHES MINIMUM AND 0.7830 INCHES MAXIMUM FRONT SHAFT |
| SHAFT TYPE | ROUND, FLATTED SINGLE SHAFT |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| ZCO IMPEDANCE MAGNITUDE IN OHMS | 370.00 NOMINAL |
| ZCO IMPEDANCE ANGLE IN DEG | 1400.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 350.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 370.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0980 INCHES NOMINAL |