| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6000.0 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0900 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM SHOULDER |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6200 INCHES NOMINAL |
| OVERALL LENGTH | 1.8610 INCHES MINIMUM AND 1.8910 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 4800.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 500.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 43.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| ROTOR DC RESISTANCE IN OHMS | 406.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 25.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT HOLE DIAMETER | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2410 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT DIAMETER | 0.1190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.0550 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.1150 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED, HOLLOWED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 0.103 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 920.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1100.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 14.00 NOMINAL |