| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND C |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.0936 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 100.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 8.50 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 17.50 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 8.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 218.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 830.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT LENGTH | 0.4218 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9750 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 2.50 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 0.056 INCH-OUNCES NOMINAL |
| TRANSFORMATION RATIO | 0.465 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.0000 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0810 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 15.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 20.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 3.50 NOMINAL |