| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 2.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 1.00 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 10 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 NOMINAL INCHES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM TEMP RISE | 125.0 DEG CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6220 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 500.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 33.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 940.0 ALLQJAA3.500 MICROWATTS |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0020 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0468 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
| ZSO IMPEDANCE ANGLE IN DEG | 76.50 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 32.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 78.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 3460.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 7.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 3000.000 MILLIMETER-MILLIGRAMS NOMINAL |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0/+30.0 |