| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.010 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM SHOULDER |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -2.0 TO 2.0 |
| OVERALL LENGTH | 2.8350 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0590 INCHES MINIMUM AND 2.0650 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1620.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 168.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 411.00 NOMINAL |
| SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT FLATTED PORTION THICKNESS | 0.1060 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4850 INCHES MINIMUM AND 0.7700 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, FLATTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 580.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 608.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |