| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 24.2 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 46.0 WATTS MINIMUM AND |
| 70.0 WATTS MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND A |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 8 |
| ZRO RESISTANCE IN OHMS | 796.00 MINIMUM AND |
| 1076.00 MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 2340.00 MINIMUM AND |
| 2860.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 102.00 MINIMUM AND |
| 138.00 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 382.50 MINIMUM AND |
| 517.50 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 935.00 MINIMUM AND |
| 1265.00 MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 255.00 MINIMUM AND |
| 345.00 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 516.00 MINIMUM AND |
| 734.00 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 89.00 MINIMUM AND |
| 127.00 MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 9.200 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 22.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7260 INCHES MINIMUM AND |
| 1.7560 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND |
| 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND |
| 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4850 INCHES MINIMUM AND |
| 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |