| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8440 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1560 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY DIAMETER | 1.9500 INCHES NOMINAL |
| BODY MATERIAL | ALUMINUM ALLOY |
| BODY SIZE | 23 |
| BODY STYLE | STANDARD ROUND, REAR MOUNTING FLANGE |
| FLANGE DIAMETER | 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 0.0250 INCHES NOMINAL SHOULDER |
| PILOT DIAMETER | 1.0625 INCHES NOMINAL |
| PILOT LENGTH | 0.1250 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 10.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 25.0 CELSIUS |
| OVERALL LENGTH | 3.7330 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 847.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 136.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 475.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -90.0 TO 90.0 |
| ROTOR DC RESISTANCE IN OHMS | 136.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 133.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 3.2 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SECOND SHOULDER DIAMETER | 1.9000 INCHES NOMINAL |
| SECOND SHOULDER FACE TO REAR FLANGE DISTANCE | 1.7000 INCHES NOMINAL |
| SECOND SHOULDER LENGTH | 0.7000 INCHES NOMINAL |
| SHAFT LENGTH | 0.2600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 1.8200 INCHES MINIMUM SINGLE SHAFT |
| SHAFT END PLAY | 0.0150 INCHES MAXIMUM |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.112 INCHES SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 8.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.1100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.8000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD CLASS | 2B SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TIP LENGTH | 0.1500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED, THREADED, UNDERCUT SINGLE SHAFT |
| SHAFT UNDERCUT DIAMETER | 0.0990 INCHES NOMINAL SINGLE SHAFT |
| SHAFT UNDERCUT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.2500 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 204.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.060 INCH-OUNCES NOMINAL |
| TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| ZRO RESISTANCE IN OHMS | 183.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 392.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 176.00 NOMINAL |