| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 15 |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| LENGTH | 0.0780 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.1750 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 75.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 110.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5230 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 15CX6XN TYPE |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2870.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 1260.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 25.30 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 250.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 44.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.6 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.1900 INCHES SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 410.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 575.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 4.80 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 4.20 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0700 INCHES NOMINAL |