| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 8.00 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | ALUMINUM ALLOY |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.1500 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 3.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7120 INCHES MINIMUM AND 1.7130 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.200 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 15.00 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 4.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 70.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 73.30 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 75.50 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 37.70 NOMINAL |
| STATOR INPUT CURRENT RATING | 180.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 800.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| TRANSFORMATION RATIO | 0.925 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.5000 INCHES NOMINAL |