| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.1320 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.8500 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5910 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 255.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -22.5 TO 22.5 |
| ROTOR DC RESISTANCE IN OHMS | 16.00 MINIMUM AND 17.50 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 100.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 450.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1220 INCHES MINIMUM AND 0.1230 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT HOLE DIAMETER | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, HOLLOWED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 45.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 6.70 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |