| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5400.0 MILLIMETER-MILLIGRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2700.0 MILLIMETER-MILLIGRAMS MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.4910 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 285.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 26.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 50.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| ROTOR DC RESISTANCE IN OHMS | 33.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 440.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 11.60 NOMINAL |
| ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 80.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 13.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 1800.0 MILLIMETER-MILLIGRAMS NOMINAL |
| UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |