| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 180.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 11 |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 3340.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 9.20 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 5470.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 80.80 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 385.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 555.00 NOMINAL |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 2.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 59.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.3200 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND |
| 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7650 INCHES NOMINAL |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5550 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 88818 |
| DESIGN CONTROL REFERENCE | RS901-2E |