| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 60.0 MAXIMUM |
| STATOR INPUT CURRENT RATING | 45.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 480.0 MILLIWATTS NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.985 ROTOR TO COMPENSATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8120 INCHES NOMINAL |
| OVERALL LENGTH | 2.6020 INCHES MINIMUM AND |
| 2.6490 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND |
| 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8430 INCHES MINIMUM AND |
| 1.8900 INCHES MAXIMUM |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND |
| 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5710 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 8182269 |