| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 20.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0620 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 3 |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0630 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.6540 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2790 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 12.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 427.00 NOMINAL |
| SHAFT DIAMETER | 0.0880 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0270 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 70.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 126.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 23.0 MILLIAMPERES NOMINAL |
| ZSO RESISTANCE IN OHMS | 126.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |