| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 280.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 950.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 11 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 107.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 81.70 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 18.10 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 79.50 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 23.00 NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 23.90 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 9.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL LENGTH | 2.2380 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9550 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0700 INCHES MINIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.2830 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | SIDE |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOM. |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT END PLAY | 0.0015 INCHES NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| FRAGILITY FACTOR | MODERATELY RUGGED |