| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0350 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 1.3 AMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 33.8 WATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 10 |
| BODY MATERIAL | ALUMINUM |
| ZRO RESISTANCE IN OHMS | 27.50 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 174.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 7.70 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 30.50 NOMINAL |
| ZRS RESISTANCE IN OHMS | 47.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 16.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 16.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 7.20 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 17.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7270 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES MINIMUM AND |
| 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |