| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1870 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 15 |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.1320 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.6030 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 0.67 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8600 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.600 OUTPUT TO INPUT MINIMUM AND 6.600 OUTPUT TO INPUT MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 215.00 NOMINAL |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5710 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| STATOR INPUT CURRENT RATING | 7.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 35.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 310.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 82.10 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 3190.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 THREADED STUD |
| TRANSFORMATION RATIO | 0.960 ROTOR TO STATOR MINIMUM AND 1.000 ROTOR TO STATOR MAXIMUM |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |