| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| LENGTH | 0.1320 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.1310 INCHES NOMINAL |
| MATERIAL | ALUMINUM BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5910 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.300 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 415.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 107.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 50.00 NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0210 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 11.50 NOMINAL |
| ZRO RESISTANCE IN OHMS | 83.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 20.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |