| FREQUENCY IN HERTZ | 1000.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 23.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 195.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 690.0 MILLIWATTS NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 116.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.500 NOMINAL |
| TRANSFORMATION RATIO | 1.970 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 1.700 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1400 INCHES NOMINAL |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND |
| 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 11530 |
| DESIGN CONTROL REFERENCE | 461-1099-1 |