| SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM SINGLE SHAFT AND 0.0350 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 NOMINAL CENTIMETERS |
| ZRO RESISTANCE IN OHMS | 53.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 54.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 31.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 65.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 21.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| TEST DATA DOCUMENT | 06481-900141-93 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TRANSFORMATION RATIO | 1.154 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9850 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0450 INCHES MINIMUM |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -9.0/+9.0 |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 17.00 OUTPUT |
| PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.900 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0650 NOMINAL INCHES |
| PLUS J ZRO REACTANCE IN OHMS | 224.50 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 23.90 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 192.40 NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.8120 INCHES NOMINAL |
| OVERALL LENGTH | 4.2060 INCHES MINIMUM AND 4.2360 INCHES MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 49.00 NOMINAL |
| SHAFT END PLAY | 0.0020 INCHES NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3940 INCHES MINIMUM SINGLE SHAFT AND 0.4340 INCHES MAXIMUM SINGLE SHAFT |