| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| BODY MATERIAL | ALUMINUM OR |
| STEEL COMP 303 |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| BODY STYLE | STANDARD ROUND, ROTATABLE HOUSING |
| BODY SIZE | 23 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 40.0 MAXIMUM |
| STATOR INPUT CURRENT RATING | 25.0 MILLIAMPERES NOMINAL |
| TRANSFORMATION RATIO | 0.965 ROTOR TO STATOR MINIMUM AND |
| 0.985 ROTOR TO STATOR MAXIMUM |
| COMPENSATION METHOD | WINDING COMPENSATED |
| PHASE SHIFT ANGLE IN DEG | 19.000 INPUT TO OUTPUT MINIMUM AND |
| 25.000 INPUT TO OUTPUT MAXIMUM |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 2.00 INCH-OUNCES MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 1.00 INCH-OUNCES MAXIMUM |
| SHOULDER DIAMETER | 1.9900 INCHES MINIMUM AND |
| 1.9930 INCHES MAXIMUM |
| OVERALL LENGTH | 4.5320 INCHES MAXIMUM |
| FLANGE DIAMETER | 2.2495 INCHES MINIMUM AND |
| 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2470 INCHES MINIMUM AND |
| 0.2530 INCHES MAXIMUM |
| BODY DIAMETER | 1.9790 INCHES MINIMUM AND |
| 1.9930 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.4100 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3550 INCHES MAXIMUM |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.2404 INCHES MINIMUM AND |
| 0.2407 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3100 INCHES MINIMUM AND |
| 0.4400 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| TEST DATA DOCUMENT | 05869-717480-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0050 INCHES MAXIMUM |
| SHAFT MAXIMUM RUNOUT | 0.0030 INCHES |
| SURFACE TREATMENT | ANODIZE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303 ASSN STD SINGLE MATERIAL RESPONSE OR |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 05869 |
| DESIGN CONTROL REFERENCE | 717480-2 |