| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 460.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.990 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| LENGTH | 0.1230 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.4700 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8900 INCHES MAXIMUM |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 870.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 136.00 NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5800 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 166.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 216.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 NOMINAL |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |