| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.60 INCH-OUNCES NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 15 |
| COMPENSATION METHOD | WINDING COMPENSATED |
| COMPENSATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.985 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| LENGTH | 0.1320 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.6700 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.1000 INCHES MAXIMUM |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 6.000 OUTPUT TO INPUT NOMINAL |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 2860.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 2760.00 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 280.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5700 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 60.0 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 295.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 45.0 MILLIAMPERES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 315.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 460.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 485.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.3120 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |