| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| COMPENSATION METHOD | RESISTOR COMPENSATED |
| FLANGE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.6040 INCHES MINIMUM AND 1.6340 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MINIMUM AND 1.2470 INCHES MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 530.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 72.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 48.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 275.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0200 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0150 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3570 INCHES MINIMUM AND 0.3930 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 75.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 120.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |