| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| FLANGE DIAMETER | 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OVERALL LENGTH | 1.7620 INCHES MAXIMUM |
| MATERIAL | ALUMINUM BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 22.00 INPUT |
| MAXIMUM TEMP RISE | 20.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.4160 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 11.000 OUTPUT TO INPUT NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 640.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 71.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 806.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 220.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 22.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 110.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 2 ROTOR, 2 STATOR |
| SHAFT DIAMETER | 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| SHAFT LENGTH | 0.3320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR INPUT ELECTRICAL POWER RATING | 58.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 158.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 18.2 MILLIAMPERES NOMINAL |
| ZRO RESISTANCE IN OHMS | 230.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 330.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 176.00 NOMINAL |
| TERMINAL DESIGNATOR AND SCHEMATIC POSITION | CONNECTION R1 POSITION B AND CONNECTION R2 POSITION C AND CONNECTION R3 POSITION A AND CONNECTION R4 POSITION D AND CONNECTION S1 POSITION H AND CONNECTION S2 POSITION E AND CONNECTION S3 POSITION G AND CONNECTION S3 POSITION F |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.5 MAXIMUM |
| UNDERCUT DIAMETER | 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |