| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| COMPENSATION METHOD | RESISTOR COMPENSATED |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| COMPENSATOR RESONANT FREQUENCY IN HERTZ | 600.0 |
| FLANGE DIAMETER | 1.0620 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 3.0320 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1400.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1570.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 240.00 NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.9700 INCHES NOMINAL SINGLE SHAFT |
| SHAFT FLATTED PORTION THICKNESS | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| SHAFT FLATTED PORTION LENGTH | 0.9100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, FLATTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 160.0 MILLIWATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 370.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 380.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 SCREW |
| UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0450 INCHES MINIMUM |