| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 240.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 920.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 11 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 16.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 107.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 3.70 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 18.10 NOMINAL |
| ZRS RESISTANCE IN OHMS | 11.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 8.90 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 8.50 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS MAXIMUM |
| TORQUE GRADIENT PER ANGULAR DEG | 5700.0 MILLIMETER-MILLIGRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 1.9750 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND |
| 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 99932 |
| DESIGN CONTROL REFERENCE | TGC11E4 |