| FREQUENCY IN HERTZ | 600.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 8 SCREW |
| BODY STYLE | STANDARD ROUND D |
| BODY SIZE | 23 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 8.0 MINIMUM AND |
| 24.0 MAXIMUM |
| STATOR INPUT CURRENT RATING | 60.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 325.50 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 76.70 NOMINAL |
| TRANSFORMATION RATIO | 0.990 STATOR TO ROTOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.200 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 45.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 1.17 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.24 |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.2 TO 0.2 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.80 INCH-OUNCES MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.40 INCH-OUNCES MAXIMUM |
| SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND |
| 1.9950 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5990 INCHES MINIMUM AND |
| 0.6000 INCHES MAXIMUM |
| SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND |
| 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 INCHES MAXIMUM |
| OVERALL LENGTH | 4.7530 INCHES MAXIMUM |
| FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND |
| 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 2.2490 INCHES MINIMUM AND |
| 2.2500 INCHES MAXIMUM |
| BODY DIAMETER | 1.9985 INCHES MINIMUM AND |
| 1.9995 INCHES MAXIMUM |
| PILOT LENGTH | 0.1090 INCHES NOMINAL |
| SHOULDER LENGTH | 0.2500 INCHES MAXIMUM |
| AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND |
| 1.9995 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 4.0800 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHAFT DIAMETER | 0.2410 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.6730 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | ALUMINUM |
| TEST DATA DOCUMENT | 81349-MIL-R-14346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-R-14346 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 23R9N6 |