| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| STATOR INPUT CURRENT RATING | 17.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 54.0 MILLIWATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 10 |
| ZRO RESISTANCE IN OHMS | 685.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2700.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 180.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 560.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1000.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 425.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 466.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 175.00 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 12.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7230 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES MINIMUM AND |
| 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2480 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 2 |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4750 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| FRAGILITY FACTOR | MODERATELY RUGGED |