| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 82.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.9 WATTS NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| BODY SIZE | 23 |
| ZRO RESISTANCE IN OHMS | 256.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1510.00 NOMINAL |
| ZSS RESISTANCE IN OHMS | 285.00 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 55.50 NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| MAXIMUM TEMP RISE | 45.0 DEG CELSIUS |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.50 INCH-OUNCES NOMINAL |
| SHOULDER DIAMETER | 1.9900 INCHES NOMINAL |
| PILOT DIAMETER | 0.6000 INCHES NOMINAL |
| OVERALL LENGTH | 4.2940 INCHES NOMINAL |
| FLANGE DIAMETER | 2.2500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| UNDERCUT DIAMETER | 1.9995 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.2030 INCHES NOMINAL |
| PILOT LENGTH | 0.0460 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| AFT OF FIRST FLANGE DIAMETER | 1.9900 INCHES NOMINAL |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.6930 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2800 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNC SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 21450 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 23CX6A |