| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 55.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| ZRO RESISTANCE IN OHMS | 268.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 620.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 65.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 188.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 342.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 118.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 42.00 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 3.0 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 17.000 INPUT TO OUTPUT MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 25.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 7.00 CENTIMETER-GRAMS MAXIMUM |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.6540 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND |
| 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0630 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0630 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0160 INCHES MINIMUM AND |
| 0.0310 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0270 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 10001 |
| DESIGN CONTROL REFERENCE | 2003167PC5 |