5990-00-853-6634 RESOLVER,ELECTRICAL Index 5990-00-853-6636 RESOLVER,ELECTRICAL

National Stock Number:
5990-00-853-6635

Federal Supply Class:
5990

National Item Identification Number:
008536635

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.


Manufacturer Information:
ESH10US199932MOOG INC.
X900215-205257GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION


Techincal Specification:
FREQUENCY IN HERTZ400.0 NOMINAL
TERMINAL TYPE AND QUANTITY7 PIN
BODY STYLESTANDARD ROUND C
BODY SIZE10
STATOR INPUT VOLTAGE RATING IN VOLTS11.8 NOMINAL
STATOR INPUT CURRENT RATING72.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING210.0 MILLIWATTS NOMINAL
ROTOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
ROTOR INPUT CURRENT RATING36.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING350.0 MILLIWATTS NOMINAL
ZRO RESISTANCE IN OHMS270.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS670.00 NOMINAL
ZSO RESISTANCE IN OHMS41.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS159.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS215.00 NOMINAL
STATOR DC RESISTANCE IN OHMS28.00 NOMINAL
PHASE SHIFT ANGLE IN DEG10.000 INPUT TO OUTPUT NOMINAL
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT1.00
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES-7.5 TO 7.5
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS16.00 CENTIMETER-GRAMS MAXIMUM
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS4.00 CENTIMETER-GRAMS MAXIMUM
SHOULDER DIAMETER0.8118 INCHES MINIMUM AND
0.8123 INCHES MAXIMUM
PILOT DIAMETER0.4995 INCHES MINIMUM AND
0.5000 INCHES MAXIMUM
OVERALL LENGTH2.7990 INCHES NOMINAL
FLANGE DIAMETER0.9360 INCHES MINIMUM AND
0.9370 INCHES MAXIMUM
FLANGE THICKNESS0.0630 INCHES NOMINAL
UNDERCUT DIAMETER0.8400 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0380 INCHES NOMINAL
SHOULDER LENGTH0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.2410 INCHES NOMINAL
ALIGNMENT HOLE DEPTH0.0500 INCHES MAXIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER0.6780 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY3
SHAFT TYPEROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER0.0880 INCHES MINIMUM AND
0.0900 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH1.3480 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH0.0300 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH0.0200 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATIONREAR
BODY MATERIALSTEEL, STAINLESS


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us