| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 7.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| FLANGE DIAMETER | 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.000 OUTPUT TO INPUT NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6870 INCHES MAXIMUM |
| OVERALL LENGTH | 2.0950 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 64.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 9.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 73.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 14.00 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 Y-STATOR |
| SHAFT LENGTH | 0.3120 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT JAC0.125 |
| STATOR DC RESISTANCE IN OHMS | 12.10 NOMINAL |
| STATOR INPUT CURRENT RATING | 135.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 400.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO | 1.112 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9000 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ZRO RESISTANCE IN OHMS | 15.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 15.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 17.00 NOMINAL |