| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 41.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 84.0 MILLIWATTS NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 380.00 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 76.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 330.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 80.00 NOMINAL |
| TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS NOMINAL |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1920 INCHES MINIMUM AND |
| 2.2160 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND |
| 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8280 INCHES NOMINAL |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3640 INCHES MINIMUM AND |
| 0.3880 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | SIDE |
| BODY MATERIAL | STEEL, STAINLESS |
| FRAGILITY FACTOR | MODERATELY RUGGED |