| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0580 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM SHOULDER |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.300 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 45.00 INPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7820 INCHES NOMINAL |
| OVERALL LENGTH | 2.3390 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 159.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 60.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.1 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| SHAFT LENGTH | 0.5450 INCHES MINIMUM AND 0.5560 INCHES MAXIMUM FRONT SHAFT |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM FRONT SHAFT |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES FRONT SHAFT |
| SHAFT THREAD CLASS | 2A FRONT SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND FRONT SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL FRONT SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF FRONT SHAFT |
| SHAFT TYPE | ROUND, THREADED FRONT SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 137.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TORQUE GRADIENT PER ANGULAR DEG | 0.009 INCH-OUNCES MINIMUM |
| TRANSFORMATION RATIO | 0.767 ROTOR TO STATOR MINIMUM AND 0.799 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 80.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 2060.00 NOMINAL |