| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8120 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.1000 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 107.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 8.90 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 18.10 NOMINAL |
| ROTOR INPUT CURRENT RATING | 240.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 920.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0320 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 5700.0 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0810 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 16.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 22.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 3.70 NOMINAL |