| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND B |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.7600 INCHES MINIMUM AND 1.8120 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| MAXIMUM TEMP RISE | 10.0 CELSIUS |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.1790 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 13.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0330 INCHES MINIMUM AND 0.0540 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 650.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 90.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 126.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 153.00 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM FRONT SHAFT |
| SHAFT DIAMETER | 0.0900 INCHES MAXIMUM REAR SHAFT |
| SHAFT LENGTH | 0.3590 INCHES MINIMUM FRONT SHAFT |
| SHAFT LENGTH | 0.3910 INCHES MAXIMUM REAR SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| STATOR INPUT CURRENT RATING | 85.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 292.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 41.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 210.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 300.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 41.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD |
| TRANSFORMATION RATIO | 2.029 STATOR TO ROTOR NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |