| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 300.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 770.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| BODY SIZE | 10 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 11.80 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 37.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 8.50 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 32.50 NOMINAL |
| ZRS RESISTANCE IN OHMS | 12.70 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 5.50 NOMINAL |
| ZSS RESISTANCE IN OHMS | 14.60 NOMINAL |
| PLUS J ZSS REACTANCE IN OHMS | 5.50 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 10.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 6.80 NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 10.200 INPUT TO OUTPUT NOMINAL |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.5 TO 7.5 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND |
| 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.5750 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9320 INCHES MINIMUM AND |
| 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES MINIMUM AND |
| 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2870 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, TAPERED, HOLLOWED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND |
| 0.0940 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.2880 INCHES NOMINAL SINGLE SHAFT |
| SHAFT HOLE DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.0775 INCHES MINIMUM AND |
| 0.0780 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.1940 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | SIDE |