| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 62.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.2 WATTS MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 11 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 350.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1975.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 3.20 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 17.90 NOMINAL |
| ZRS RESISTANCE IN OHMS | 430.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 170.00 NOMINAL |
| TRANSFORMATION RATIO | 0.102 ROTOR TO STATOR NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND |
| 0.6250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.3370 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND |
| 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7750 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0850 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| FRAGILITY FACTOR | MODERATELY RUGGED |