| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 5.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.3510 INCHES MINIMUM AND 0.3570 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0938 INCHES NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9270 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.9760 INCHES MINIMUM AND 2.0390 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.060 INCHES |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.4690 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 12.500 INPUT TO OUTPUT MINIMUM AND 16.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 702.10 MINIMUM AND 949.90 MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 112.00 MINIMUM AND 168.00 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 204.00 MINIMUM AND 276.00 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 200.00 MINIMUM AND 271.40 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 36.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SECURING HOLE QUANTITY | 2 |
| SHAFT DIAMETER | 0.0900 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.2260 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 37.40 MINIMUM AND 50.60 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 264.00 MINIMUM AND 396.00 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 296.00 MINIMUM AND 444.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 54.40 MINIMUM AND 81.60 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
| UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |