| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0630 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.5340 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2460 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 13.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2230.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 1300.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 490.00 NOMINAL |
| SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 1.4 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 3.0 OUNCES |
| SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT LENGTH | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8123 INCHES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 70.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR INPUT CURRENT RATING | 23.0 MILLIAMPERES NOMINAL |
| ZRO RESISTANCE IN OHMS | 770.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1030.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 178.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 1.930 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.8370 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |