| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 30.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 10.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9350 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM SHOULDER |
| OVERALL LENGTH | 1.9130 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 18.000 INPUT TO OUTPUT MINIMUM AND 28.000 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 111.35 MINIMUM AND 150.65 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 150.45 MINIMUM AND 203.55 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 72.90 MINIMUM AND 89.10 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| SHAFT DIAMETER | 0.0898 INCHES NOMINAL BOTH SHAFTS |
| SHAFT LENGTH | 0.2190 INCHES NOMINAL REAR SHAFT |
| SHAFT LENGTH | 0.4130 INCHES NOMINAL FRONT SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL BOTH SHAFTS |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL BOTH SHAFTS |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 56.00 MINIMUM AND 84.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 44.80 MINIMUM AND 67.20 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 39.60 MINIMUM AND 48.40 MAXIMUM |
| STATOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.2 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| TRANSFORMATION RATIO | 0.965 ROTOR TO STATOR MINIMUM AND 1.015 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0570 INCHES NOMINAL |