| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| BODY MATERIAL | ALUMINUM ALLOY |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 23 |
| FLANGE DIAMETER | 2.2500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.4220 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0460 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 4.2940 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 75.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5750 INCHES NOMINAL |
| PILOT DIAMETER | 0.6000 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0460 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 172.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 264.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 3.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.2405 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.7190 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.180 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNC SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9900 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 238.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| UNDERCUT DIAMETER | 1.9950 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.2030 INCHES NOMINAL |