| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| ALIGNMENT HOLE DEPTH | 0.3750 INCHES NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 10 |
| FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 1.7210 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 30.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2460 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0380 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 128.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 14.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 23.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 15.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 1.0 WATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 25.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 41.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 6.40 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 6.50 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 3400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| TRANSFORMATION RATIO | 0.454 STATOR TO ROTOR NOMINAL |
| UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |