| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 6.0 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY STYLE | STANDARD ROUND C |
| BODY SIZE | 11 |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| LENGTH | 0.0620 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 2.3370 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9500 INCHES NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 288.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 24.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 470.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 280.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0260 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9750 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 35.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 49.50 NOMINAL |
| ZSO RESISTANCE IN OHMS | 8.10 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 7.50 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 0.485 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 1.0000 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |