5990-00-982-2760, RESOLVER,ELECTRICAL

National Stock Number:
5990-00-982-2760

Federal Supply Class:
5990

National Item Identification Number:
009822760

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.

Manufacturer Information:

X900491

05257

GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION

Techincal Specification:

FREQUENCY IN HERTZ	400.0 NOMINAL
TERMINAL TYPE AND QUANTITY	7 SOLDER STUD
BODY STYLE	STANDARD ROUND C
BODY SIZE	10
STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
STATOR INPUT CURRENT RATING	72.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING	210.0 MILLIWATTS NOMINAL
ROTOR INPUT VOLTAGE RATING IN VOLTS	26.0 NOMINAL
ROTOR INPUT CURRENT RATING	36.0 MILLIAMPERES NOMINAL
ROTOR INPUT ELECTRICAL POWER RATING	350.0 MILLIWATTS NOMINAL
ZRO RESISTANCE IN OHMS	270.00 NOMINAL
PLUS J ZRO REACTANCE IN OHMS	670.00 NOMINAL
ZSO RESISTANCE IN OHMS	41.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS	159.00 NOMINAL
ROTOR DC RESISTANCE IN OHMS	215.00 NOMINAL
STATOR DC RESISTANCE IN OHMS	28.00 NOMINAL
PHASE SHIFT ANGLE IN DEG	18.000 INPUT TO OUTPUT NOMINAL
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	50.00
SHOULDER DIAMETER	0.8118 INCHES MINIMUM AND
	0.8123 INCHES MAXIMUM
PILOT DIAMETER	0.4995 INCHES MINIMUM AND
	0.5000 INCHES MAXIMUM
OVERALL LENGTH	1.6410 INCHES NOMINAL
FLANGE DIAMETER	0.9360 INCHES MINIMUM AND
	0.9370 INCHES MAXIMUM
FLANGE THICKNESS	0.0630 INCHES NOMINAL
UNDERCUT DIAMETER	0.8370 INCHES MINIMUM AND
	0.8400 INCHES MAXIMUM
UNDERCUT WIDTH	0.0620 INCHES NOMINAL
PILOT LENGTH	0.0380 INCHES NOMINAL
SHOULDER LENGTH	0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.2810 INCHES MAXIMUM
ALIGNMENT HOLE DEPTH	0.0500 INCHES MAXIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER	0.6780 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY	3
SHAFT TYPE	ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER	0.0895 INCHES MINIMUM AND
	0.0900 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH	0.1900 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH	0.0300 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH	0.0200 INCHES NOMINAL SINGLE SHAFT
TERMINAL LOCATION	REAR
BODY MATERIAL	STEEL, CORROSION RESISTING
THE MANUFACTURERS DATA
MANUFACTURERS CODE	05257
DESIGN CONTROL REFERENCE	X900491

Click here to Register for Free 30-day Trial